Start here
How to Set Up Air Compressor Lines in Your Shop
Plan, size, and install air compressor lines in a home or small shop: piping choices, layout, drops, drains, and leak testing, with key safety notes.
Setup and Upkeep
Planning air lines, pipe materials, hoses, couplers, regulators, dryers and wiring for a shop setup.
Start here
Plan, size, and install air compressor lines in a home or small shop: piping choices, layout, drops, drains, and leak testing, with key safety notes.
Compare air compressor coupler styles (M-style industrial, A-style ARO, T-style automotive, V-style high-flow) and avoid mismatched connections that leak.
Learn how an air compressor regulator works, with a text diagram of its parts, how diaphragms hold steady outlet pressure, and how to size one.
Run several air tools from one compressor with a manifold: choosing one, sizing demand against CFM, and adding shutoffs, regulators, and drains.
Is black iron pipe safe for air compressor lines? Covers the benefits, rust and thread-leak risks, fittings, and when copper or aluminum is better.
Does compressed air come out wet? Learn how separators, filters, and refrigerated, desiccant, or membrane dryers remove water, and what dew point means.
Do you need a filter-regulator-lubricator (FRL) for your air compressor? Learn what each stage does, the correct order, and when to skip the lubricator.
Find and fix compressed air leaks with a soap test and a pressure-decay check, and estimate what leaks cost with a simple formula you can run yourself.
Step-by-step guide to adjusting your compressor's outlet regulator: set pressure while air flows, stay within tool ratings, and leave the switch alone.
There's no single hose length limit. Learn how length, inside diameter, flow, and fittings cause pressure drop, and how to test your hose at the tool.
Is PVC okay for air compressor lines? No. PVC is brittle under pressure and can shatter. Learn why water-rated PVC is different and what to use instead.
Can you use PEX for air compressor lines? Compare standard PEX with PEX-AL-PEX, check pressure and UV limits, and see when metal pipe is the better choice.
Step-by-step guide to installing a RapidAir compressed air kit: plan the route, cut and fit the tubing, mount manifolds, and test for leaks.
Where to put shutoff valves and drop legs in a compressed air line: at the tank, at each drop, and at the low end with a drain to keep water out of tools.
Compare air hose types, including rubber, PVC, polyurethane, nylon, hybrid, coiled, and reinforced, and how to pick diameter, length, and whip hoses.
The main disadvantages of compressed air are energy cost, leaks, noise, moisture, injury risk, and upkeep, plus practical ways to reduce each one.
The proper way to start an air compressor: check oil, power, and drains, start with the outlet closed, watch the gauge, then drain the tank after use.
If your air compressor won't go over 40 psi, check the outlet regulator, drain valves, leaks, the check valve, and the pressure switch, in that order.
How a dedicated air compressor circuit works: reading the nameplate, breaker and voltage basics, cord limits, and when to hire a licensed electrician.
Related topics