Maintenance and Repair

How to Winterize an Air Compressor for Storage

Winterize an air compressor for storage: drain the tank, change old oil, clean the intake, keep it dry, and follow a spring restart checklist.

On this page
  1. Why cold and moisture matter
  2. Step 1: Warm the unit, then shut it down
  3. Step 2: Drain the tank completely
  4. Step 3: Change old oil before storage
  5. Step 4: Clean and protect the unit
  6. Step 5: Decide on the drain valve
  7. Where to store it
  8. Do not use antifreeze in an air-cooled compressor
  9. Spring restart checklist
  10. Frequently asked questions

Winterizing an air compressor means keeping moisture out of the tank and pump while the unit sits unused. Drain the tank completely, change old oil, clean the intake, and store the unit somewhere dry and frost-protected. Most air-cooled compressors do not need antifreeze.

Why cold and moisture matter

A compressor pulls in humid air and makes water as it compresses that air. Water left in the tank rusts the inside of the tank. In a cold garage or shed, any water still in the tank, valves, or lines can freeze and crack fittings or parts. Oil that has aged or absorbed moisture can break down, and seals and gaskets can dry out during long storage.

Step 1: Warm the unit, then shut it down

Run the compressor for a few minutes so the oil warms up and drains more easily. Let it build pressure, then turn it off. Unplug it, release all pressure, and let the unit cool to a safe temperature. See how to release air out of a compressor.

Step 2: Drain the tank completely

Open the drain valve at the bottom of the tank and let it empty. Keep the valve open until the gauge reads 0 PSI and no more water comes out. Draining after every use matters during the season, but a full drain before storage matters most.

Step 3: Change old oil before storage

On an oil-lubricated unit, change the oil before storage if it is dark or milky, or if the unit has run hard since its last change. Oil left in the unit for months ages and picks up moisture. Follow how often to change air compressor oil for the steps.

Oil-free units have no oil to change. Check the manual for any other service items.

Step 4: Clean and protect the unit

  • Wipe down the cooling fins, fan, and housing, and remove dust and debris.
  • Clean or replace the intake filter, so it does not clog or hold moisture.
  • Check hoses and fittings for cracks or damage, and repair or replace anything you find before storage.
  • Cover the intake loosely to keep dust and insects out. Do not seal the unit in plastic, which traps condensation.

Step 5: Decide on the drain valve

Some owners leave the tank’s drain valve open during long storage, so any moisture left in the tank can escape. Check the manual before you do this. Close the valve again before the first use of the season, and confirm the tank is empty before you start the unit.

Where to store it

  • Choose a dry place. Above freezing is best if you can manage it, because water in the lines is the main freeze risk (see compressed dry air).
  • Set the unit on a board or rubber pads, not directly on damp concrete.
  • Keep it out of direct sun, away from heaters, and away from fuel and chemicals.
  • Avoid a closed trailer or shed where condensation forms on cold surfaces.

Do not use antifreeze in an air-cooled compressor

Most air-cooled piston compressors do not need antifreeze. Antifreeze is a plumbing product for water lines, such as the water system in an RV, which you blow out with compressed air instead. Do not add it to a compressor’s pump or tank. Water-cooled units have their own coolant guidance, so follow the manual for those.

Spring restart checklist

  1. Inspect the tank for rust, dents, or leaks. If you find any, do not use the unit until a qualified person has checked it.
  2. Drain the tank again, and close the drain valve tightly.
  3. Check the oil level and condition. Change the oil if it needs it.
  4. Clean or replace the intake filter.
  5. Check hoses and fittings for cracks, and check the power cord and plug.
  6. Run a short test, following the normal start-up procedure, and listen for unusual noise, leaks, or slow pressure build.
  7. For a full check, follow the testing and inspection guide.

Frequently asked questions

Should I drain my air compressor tank after every use?

For most owners, yes. Water builds up each time the compressor runs, and draining after use keeps rust down. Heavy use or humid air means you should drain more often.

Can I store an air compressor in an unheated garage?

Yes, if the unit is dry and the tank and lines are fully drained. Avoid spots with condensation or standing water. Frozen water in the tank or lines is the main risk, so drain them first.

The complete guide to maintenance and repair

Air Compressor Tips: Maintenance, Care and Upgrades
Read the guide

Keep exploring

Guides from other topics

All topics →