Maintenance and Repair

Air-Cooled Compressors: Cooling and Preventing Overheating

Learn what air-cooled compressors are, why they overheat, how to keep them cool and clean, and what to do if one shuts down from heat.

On this page
  1. What “air-cooled” means on an air compressor
  2. Why compressors overheat
  3. How to keep it cool
  4. Warning signs of overheating
  5. What to do if it overheats
  6. Frequently asked questions

Most small air compressors are air-cooled. They shed the heat from compressing air through metal fins and a fan, not through water. That keeps the unit simple and affordable, but it also means heat control depends on airflow, cleanliness, and the room the unit sits in. Most overheating comes from a short list of causes, and most of them can be fixed.

This guide is about air compressors that power tools. “Air-cooled” in HVAC means something different. See the FAQ at the end.

What “air-cooled” means on an air compressor

Compressing air creates heat. The compressor has to shed that heat so the air, the pump, and the motor stay within their safe range. An air-cooled unit moves surrounding air across cooling fins or a radiator on the pump, usually with a fan. A water-cooled unit uses a water loop instead, and those are mostly larger industrial machines.

Air-cooled units cost less to install because they do not need a water supply, a cooling tower, or pumps. The trade-off is that they need good ventilation and some fan power. Some units also have an aftercooler, which cools the compressed air itself before it reaches the tank.

Oil-injected rotary screw units also rely on their oil to carry heat away, so the oil level and condition matter for cooling as well. See how often to change air compressor oil.

Why compressors overheat

Common causes include:

  • Dirty cooling fins, a clogged intake screen, or dust on the fan. Dust works like insulation.
  • Blocked airflow from walls, stacked boxes, or a closed cabinet.
  • A hot room, or a spot in direct sun or beside a heater.
  • Running too long without rest. Many piston compressors are built for intermittent use. Running one constantly, or running a small unit for hours to fill a large tank, adds heat.
  • Low or dirty oil on oil-lubricated units.
  • Air leaks that keep the pump running more than it needs to.
  • A compressor that is too small for the tools. A unit that runs at its limit all day has no cooling margin.
  • A loose or slipping drive belt on belt-driven units, which can slow the pump and the fan.
  • Worn or leaking valves, which make the pump work harder and produce more heat.

How to keep it cool

  1. Clean the fins, fan, and intake screen. Use a soft brush and a vacuum. Avoid blowing debris deeper into the motor.
  2. Give it room. Keep the area around the compressor clear on all sides, following the clearance in your manual.
  3. Choose a cool, well-ventilated spot. Do not run it in a closed closet. If you enclose it for noise, the enclosure must have proper ventilation. See soundproofing an air compressor.
  4. Check the drive belt, if it has one. Look at its tension and condition. A loose belt slips and reduces pump and fan speed.
  5. Keep the oil at the right level and grade, and change it on schedule. See the oil change guide.
  6. Fix leaks. A unit that restarts constantly to top up the tank runs hotter than it needs to.
  7. Respect the duty cycle in the manual, and let the unit cool between long runs.

Warning signs of overheating

  • The compressor shuts off from heat and will not restart until it cools.
  • The pump head or housing is too hot to keep your hand on.
  • A burning smell, or a smell like hot insulation or paint.
  • Dark, varnished, or burnt-looking oil.
  • The motor overload trips.
  • Air output drops, or the pump takes noticeably longer to build pressure than before.

What to do if it overheats

  1. Stop the compressor and unplug it.
  2. Let it cool completely before you open covers or remove caps. Do not touch the pump head while it is hot.
  3. Check the simple causes first: clogged fins, a blocked intake, blocked vents, low or dirty oil, and a loose belt.
  4. Look for leaks that could be making the compressor run longer than it should.
  5. Restart it after it cools, and watch it closely. If it overheats again, stop and have it checked. Never bypass a thermal switch or an overload to keep the unit running.
  6. Call a qualified technician if the cause is not obvious, if the oil is discolored, if you smell something burning, or if the unit keeps shutting down.

Frequently asked questions

How hot is too hot for a compressor?

There is no single number for every compressor. Check the operating and ambient temperature limits in your manual. Treat a heat shutdown or a high-temperature alarm as a sign the unit is running too hot, and do not keep running it.

How do you cool an air compressor?

You cannot chill the compressor directly, but you can reduce the heat it makes and help it shed heat faster. Clean the fins and fan, improve airflow, move the unit to a cooler spot, fix leaks so it runs less, keep the oil right, and stay within its duty cycle.

What are the 5 types of compressors in HVAC?

HVAC refrigerant compressors are a different machine. They sit inside air conditioners and heat pumps and move refrigerant, not air for tools. The common types include reciprocating, rotary, scroll, screw, and centrifugal. The advice in this guide does not apply to them.

What is CFM in a compressor?

CFM, or cubic feet per minute, measures how much air a compressor delivers. It is not a measure of heat. A compressor that is too small for a tool’s CFM runs longer and hotter, which can lead to overheating. See how to add more CFM to an air compressor.

The complete guide to maintenance and repair

Air Compressor Tips: Maintenance, Care and Upgrades
Read the guide

Keep exploring

Guides from other topics

All topics →