Uses and Air Tools

Air Compressor Size for Orbital and Dual-Action Sanders

Size an air compressor for orbital and dual-action sanders using the sander's listed CFM at 90 PSI, plus tank, regulator, dust and respiratory notes.

On this page
  1. What the Terms Mean
  2. Look Up the Sander’s Air Use
  3. Tank Size and Run Time
  4. Regulator, Moisture and Oil
  5. Dust and Respiratory Protection
  6. Setup Tips

Size the compressor from the sander’s listed air use, usually given as CFM at 90 PSI. Choose a compressor whose CFM at that pressure comfortably exceeds the sander’s rating, because sanding draws air continuously while the trigger is held. One manufacturer’s guide lists about 8 to 12.5 CFM at 90 PSI for orbital sanders, which gives a sense of the range. Your sander’s own figure governs. A small unit may handle light, short sanding, but long sessions need a larger tank and more airflow.

What the Terms Mean

The terms overlap. Dual-action and random-orbit sanders move their pad in an irregular pattern, which reduces the swirl marks that a fixed pattern can leave. Those names are often used for the same type of tool. Orbital is a broader term, and some orbital sanders move in a fixed circular path. Check the tool’s specifications to see its pattern and its air use, rather than relying on the name.

Look Up the Sander’s Air Use

Three numbers matter:

  • CFM at 90 PSI. The volume of air the sander uses while running. This drives the compressor choice.
  • Required pressure at the tool. Set the regulator to the sander’s rated pressure.
  • Dust extraction. Some sanders use air to power dust extraction, which adds to the total air use. Check whether the figure you have includes it.

Sander size, pad diameter and design all change the figure, so use the listing for your model.

Tank Size and Run Time

Sanding draws air for as long as you hold the trigger, so the pump has to keep the tank pressurized. A small tank runs down quickly on a long sanding session. A larger tank and enough CFM let the sander run longer before the compressor refills. For light, short sanding, a small unit may be enough. For full panels or long sessions, plan for more capacity. For a general look at small tanks, see what a 10-gallon air compressor can do.

Regulator, Moisture and Oil

Set the regulator to the sander’s rated pressure. A setting that is too high wastes air, and one that is too low reduces sanding performance.

Moisture in the line can clog sanding discs, cause spotting on finishes and wear the tool. Use a water separator and a filter at the point of use, and drain the tank regularly. Follow the sander’s guidance on lubrication, since some air sanders run oil-free and others need a few drops of oil. Oil-free compressors reduce the chance of oil spots on wood and body work.

Dust and Respiratory Protection

Sanding produces fine dust, and some of it can harm your lungs. Use a dust extraction system where you can, and ventilate the work area. Wear respiratory protection rated for the dust you are creating. A basic dust mask may not be adequate for all materials, and some finishes and coatings need a respirator with a higher protection rating.

Lead paint. Homes built before 1978 may contain lead paint. Sanding painted surfaces in those homes can release lead dust, which is dangerous to children and adults. Use lead-safe practices, containment and cleanup methods. Check local rules before dry sanding painted surfaces, because some areas restrict it.

Wear eye and hearing protection as well. Sanders and compressors are loud, and abrasive particles can fly.

Setup Tips

  • Set the regulator at the sander, not only at the compressor.
  • Keep hoses as short as practical, and size them for the run.
  • Use a water separator and a filter at the point of use.
  • Drain the tank after each session.
  • Check fittings for leaks, since each leak adds run time and heat to the compressor.

For how the compressor, regulator and tool fit together, see how air tools work. For a broader list of air-powered sanders and grinders, see examples of tools that use compressed air.

The complete guide to uses and air tools

Things to Do With an Air Compressor: Uses and Applications
Read the guide

Keep exploring

Guides from other topics

All topics →