Common tools that run on compressed air include nail guns and staplers, impact wrenches and air ratchets, drills, die grinders, orbital sanders, paint sprayers, airbrushes, blow guns, tire inflators and jackhammers. Many more exist, from air-powered shears to sandblasters. The groups below sort them by task.
Fastening Tools
- Nail guns. Framing, finish and brad nailers drive nails or brads with a single trigger pull. Each size needs a suitable regulator and air supply.
- Staplers. Used for upholstery, sheathing and crate work.
- Pin nailers. Drive very fine pins, often for trim and craft work.
Drive and Torque Tools
- Impact wrenches. Remove stuck lug nuts and suspension bolts with short bursts of torque.
- Air ratchets. Run bolts and nuts quickly in tight spaces. See air ratchets vs impact wrenches for the difference.
- Air drills. Bore holes in wood and metal, often in tight or wet locations where electric tools are less practical.
Grinding, Sanding and Cutting
- Die grinders. Shape, deburr and polish metal with small bits and wheels.
- Angle grinders. Cut off and grind metal and masonry with a larger disc.
- Orbital and dual-action sanders. Finish wood, metal and body filler. Dual-action models move in a random orbit, which reduces swirl marks. For sizing, see air compressor size for orbital and dual-action sanders.
- Air shears. Cut sheet metal with a hand-operated blade.
- Plasma cutters. These are powered electrically, but they use compressed air as the cutting gas, so they depend on a suitable air supply.
Demolition and Breaking
- Jackhammers and air chisels. Break concrete, asphalt and stone with repeated strikes.
- Needle scalers. Remove rust, scale and old coatings from steel surfaces.
- Rock drills. Drill into hard rock and masonry, often on construction sites.
Spraying and Coating
- Paint sprayers. Apply paint and coatings over large areas.
- Airbrushes. Apply fine detail in model building, miniature painting and art.
- Sandblasters. Use pressurized abrasive to clean or prepare surfaces. These need breathing protection and are covered in what size air compressor you need for sandblasting.
Cleaning, Inflation and Lubrication
- Blow guns. Clear dust and debris from benches, tools and machinery. Keep the pressure low, as explained in our overview of compressed air uses.
- Tire inflators. Fill car, bicycle and sports equipment tires.
- Air-powered grease guns. Push grease into fittings on vehicles and machines.
Industrial Equipment
- Pneumatic cylinders. Clamp, push and lift parts in automated lines.
- Air motors. Turn conveyors, mixers, hoists and winches in some plants.
- Vacuum pumps and generators. Hold and move parts in packaging and handling systems.
How to Tell Whether a Tool Runs on Compressed Air
Check the label, the spec sheet and the connection:
- The product is labeled “pneumatic” or “air tool.”
- It has an air inlet, often a 1/4-inch quick-connect fitting.
- Its spec sheet lists CFM and PSI rather than only volts, amps or amp-hours.
A tool that runs only on a battery or a cord is not air-powered. Some models offer both an air inlet and an electric option, so check the spec sheet for an air inlet before you assume. For how these tools work inside, see how air tools work.