Metabo HPT’s compressors are widely recommended for job-site work, and its best-known line is The Tank series. The brand offers a 6-gallon pancake for framing and trim crews, an 8-gallon trolley for longer runs, and a small quiet unit for indoor use. Each suits a different kind of work. Here is what the specs mean and how to choose.
What Metabo HPT makes for air
Metabo HPT, which was previously sold under the Hitachi name, makes a range of pneumatic and power tools. The compressors in our research are oil-free pancake, trolley, and quiet portable units. Model numbers differ by region and retailer, so match the number on the label to the spec sheet before you buy.
The Tank 6-gallon pancake (EC914S)
This is the most common Metabo HPT compressor for job-site work. The listed specs are a 200 PSI max pressure, about 4.0 CFM at 90 PSI, and a weight of roughly 41 pounds. Sources we reviewed describe it as suited to framing, roofing, and siding work, and say it can run multiple nailers at once. Treat that as a best case. Real results depend on the nailer model, how often it fires, and whether the tool is set to the right pressure.
The main drawback is noise. Reviewers list the standard model at around 93 dB, which is loud enough that you should wear hearing protection for long sessions. Sources also note the frame has protective roll cages, which suits a job site where a unit gets knocked around.
The Tank 8-gallon trolley (EC1315S)
The trolley model adds a bigger tank, a listed max of about 225 PSI, and about 5.0 CFM at 90 PSI. It has pneumatic tires, an extendable handle, and dual outlets, so two tools can run from one unit. At roughly 93 pounds, it is heavier and bulkier, but the wheels make it easy to roll on site.
Choose the trolley when your crew runs several air-hungry tools for long stretches. The extra tank helps the compressor keep up without constant cycling. For a small garage with occasional use, it is more machine than most people need.
The 1-gallon Quiet Series (EC28MM)
This small unit is listed at 59 dB and weighs about 25 pounds. That is quiet enough to hold a normal conversation beside it while it runs. The tradeoff is a very small tank and limited capacity. It is suited to light trim, interior finish work, and a quiet home shop. It is not built for framing or continuous nailing.
Pros and cons
Pros
- High max PSI and airflow ratings compared with typical budget pancakes.
- Sturdy, job-site-ready build, including roll cages on larger models.
- Oil-free pumps mean no routine oil changes or belt maintenance.
Cons
- Standard and high-capacity job-site models can be loud.
- Oil-free designs can wear faster under heavy industrial use than cast-iron, oil-lubricated shop compressors.
- The quiet model’s small tank limits what it can run.
Which model fits your work
- Framing, roofing, or siding crews: The 6-gallon pancake for mobile work, or the 8-gallon trolley if several tools run at once.
- Trim, cabinets, and interior finish: The 6-gallon pancake is a common choice, and the 1-gallon Quiet Series works for light tasks.
- Indoor shop where noise matters: The 1-gallon Quiet Series for light jobs, or a different quiet brand for larger tanks. California Air Tools is a common comparison for quiet portable units.
For a lower-airflow pancake with a similar footprint, Porter-Cable’s 6-gallon pancake is a common alternative. The Metabo HPT unit lists more airflow, so compare the CFM numbers before you decide.
Common questions
Are Metabo tools good quality?
The brand is widely praised for build quality and high pressure ratings in the summaries we reviewed, and contractors and DIYers both recommend its job-site models. Quality depends on the specific model and how you use it. Oil-free pumps are lower maintenance but may not last as long under heavy, continuous work. For light and intermittent use, the build is generally considered solid.
What is the most reliable air compressor brand?
There is no single answer. Reliability depends on the model, the pump type, how hard you run it, and how it is maintained. Oil-lubricated, cast-iron pumps tend to have the best reputation for long, heavy use. For light work, many well-built oil-free units perform reliably. Our air compressor brands and ratings guide explains how to compare brands on the specs that matter.
Before you buy
Check the max working pressure of the tank and the tools, and never exceed it. Drain the tank after use to prevent rust. Wear hearing protection around the 6-gallon and trolley models, since their noise levels can be high. Read the manual for the exact model you buy.